Once the panels for the maze floor had dried out, it was time to paint them.

There are many ways to join panels together and so I sought out the advice of another friend who does a lot of amazing woodwork. Jeff’s thoughts were to try biscuit joints but with a twist. Since I wanted to be able to rearrange panels, he suggested not gluing the biscuits in and instead relying on them as an alignment aid.

The next question was how will we keep panels butted up next to each other. We decided that we would try to push them against each other and if that didn’t work well enough, then we would come up with a soln. Others have suggested using latches but Jeff was concerned that if the latches were on the bottom side, they would create a torque and cause the seam to open on the top side.

Another question was how to finish the plywood and with what paint. I sent a note to Nakashima-san and he posted information on what he uses: this is an acrylic based paint, which in the US translates into a latex paint.

I tried a few different schemes (black chaulkboard paint – I thought it would give a nice texture but it was too smooth, flat black paint, with and with/without primer).

In the end, I decided to use two coats of flat black paint without primer. The reason I went without primer is that the primer was masking the texture of the wood and making the finish very smooth.

This Post Has 3 Comments

  1. dragonet80

    Nice mini-instructables Harjit.

    Can you provide more info on that paint? I will try to find a similar paint in Spain, but I do not understand exactly the type you used.

  2. Harjit Singh

    I used Rustoleum Painters Touch Flat Black brush on paint. Here is the manufacturer’s link:
    http://rustoleum.com/CBGProduct.asp?pid=96&sid=1976502

    At the bottom of the page above, they talk about it being Acrylic and that is what Nakashima-san said the paint they used for the Japanese contest maze floors.

    I bought it at HomeDepot (http://www.homedepot.com/h_d1/N-5yc1v/R-100172539/h_d2/ProductDisplay?selectedCatgry=SEARCH+ALL&jspStoreDir=hdus&catalogId=10053&navFlow=3&keyword=1976502&Ntpc=1&langId=-1&Nu=P_PARENT_ID&storeId=10051&Ntpr=1&ddkey=Search). It may be easier to use this link to get info. on the product.

    Please note: I have not tested the mouse on this surface and am not saying it will work, just that I used it.

  3. dragonet80

    Ok, thanks, I better wait until you have tested it before.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.